Chapter 4: Battery Test - Midtronics intellect EXP-1000 Instruction Manual

The EXP will guide you through the steps of selecting your battery test parameters and interpreting the
results. Before you start the test, review the instructions in Chapter 3: Test Preparation.
1. Select the battery LOCATION.
1 OUT OF VEHICLE
2 IN VEHICLE
Press the NEXT soft key to continue. The BACK soft key returns you to the Main Menu at the
start of the test and to the previous screen as you progress.
2. Select the POST TYPE. The REMOTE option appears for the IN VEHICLE test.
1 TOP
2 SIDE
 REMOTE
Press the NEXT soft key to continue.
. Select the BATTERY TYPE.
1 REGULAR/AUTO
2 AGM
 AGM/SPIRAL
4 GEL
Press the NEXT soft key to continue.
4. Select the battery's capacity rating standard. The standard, and the rating units required
in step 5, are printed on the battery label. If the information is unreadable, contact the
battery manufacturer.
1 CCA
2 CA
 MCA
4 JIS
5 DIN
6 SAE
7 IEC
8 EN
Press the NEXT soft key to continue.

Chapter 4: Battery Test

19
• •
Chapter 4: Battery Test