Energy Efficiency; Energy Saving - AEG KME721000M User Manual

26 www.aeg.com
Problem
The display shows an error
code that is not in this table.
Steam and condensation
settle on the food and in the
cavity of the oven.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".
14.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

15. ENERGY EFFICIENCY

15.1 Energy saving

The oven contains features
which help you save energy
during everyday cooking.
Possible cause
There is an electrical fault.
You left the dish in the oven
for too long.
The demo mode is activa-
ted.
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
.........................................
.........................................
.........................................
General hints
Make sure that the oven door is closed
properly when the appliance operates.
Do not open the door too often during
cooking. Keep the door gasket clean and
make sure it is well fixed in its position.
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De-
partment.
Do not leave the dishes in
the oven for longer than 15 -
20 minutes after the cooking
process ends.
1. Deactivate the appli-
ance.
2. Touch and hold
the appliance activates
and deactivates.
3. Touch and hold
at the same time un-
til an acoustic signal
sounds. "Demo" goes
out.
until
and