Table of Contents
Advertisement
Replacement
procedures
Replacing the air filter
5-18
Replacement procedures should be performed on an as- needed basis.
Components that need periodic replacement include the air filter , film
cassette battery, DSA lamps, exposure lamps and imaging guides.
The air filter should be replaced at least once a year, more often if
needed.
IMPORTANT: Never operate the scanner/microimager without an air
filter installed. The imaging apparatus will quickly
become contaminated with dust and dirt, impairing
image quality.
1. Remove the air filter cover by pressing in on the top of the cover to
release the catch.
Air filter cover
Air filter
2. Carefully remove the old air filter. Note the orientation of the filter
as it is removed from the machine.
3. Orient a new air filter the same as the old air filter, and insert it into
the space left open by the old air filter.
4. Replace the air filter cover by first inserting the bottom edge and
then pushing in the top edge in place.
Catch
A-61096 June 1999
Advertisement
Table of Contents
