Victron energy Color Control GX Manual page 11

Color Control GX manual [Victron Energy]
(/live/_detail/ccgx:bmv_auto.png?id=ccgx%3Astart)
The 'Automatic' function uses the following logic:
1. First try to use a battery service (BMV or Lynx Shunt VE.Can).
2. If there is more than one battery service, just use a random one.
3. If no battery service is available, check there are no solar chargers and no normal chargers.
4. If there are none present, assume that there are no other DC chargers or loads, and that it is therefore safe to use the VE.Bus SOC (more info on BMV vs VE.Bus SOC (/live
/vrm_portal:faq?&#what_is_the_difference_between_the_bmv_soc_and_the_vebus_soc)).
The 'No battery monitor' choice:
Use the 'No battery monitor' choice in systems where there is only a Multi connected to the CCGX, and no battery monitor, even though that system does have other DC loads or other chargers connected to the same
battery, making the SOC from the Multi incorrect.
See also this CCGX FAQ page on whether a BMV is necessary in a system or not (/live/ccgx:ccgx_faq#do_i_need_a_bmv_to_see_proper_battery_state_of_charge_or_not).
3 More information resources
CCGX Datasheet
[https://www.victronenergy.com/upload/documents/Datasheet-Color-Control-GX-EN.pdf]
CCGX - Frequently asked questions (/live/ccgx:ccgx_faq)
Generator auto start/stop with Color Control GX (/live/ccgx:generator_start_stop)
Manually updating CCGX firmware (/live/ccgx:firmware_updating)
CCGX Remote VEConfigure and firmware updates (/live/ccgx:ccgx_ve_power_setup)
VRM Portal - Frequently asked questions (/live/vrm_portal:faq)
Open source (/live/open_source:start)
Trouble shooting Remote Console on VRM (/live/vrm_portal:troubleshooting_ccgx_vrm_connectivity#trouble_shooting_remote_console_on_vrm)
DISQUS Comments
11 de 13
https://www.victronenergy.com/live/ccgx:start
21/11/16 19:12