Processing Time For S(P).Sfcscomr Instruction And S(P).Sfctcomr Instruction - Mitsubishi Q series Programming Manual

3 SPECIFICATIONS
3.3.2 Processing time for S(P).SFCSCOMR instruction and S(P).SFCTCOMR
instruction
Processing time for S(P).SFCSCOMR instruction and S(P).SFCTCOMR instruction is shown
below.
[Condition]
• The number of comments to be stored in the comment file: 1000
• Sequence steps in the SFC step in the SFC program: 1000 sequence steps
• The number of active steps: 40
Instruction
At instruction execution
S(P).SFCSCOMR
At END processing (read 1 comment)
At instruction execution
At END
S(P).SFCTCOMR
processing
(read 1
comment)
1: Indicates that the sequence steps in SFC steps consist of 800 sequence steps.
3 - 16
Condition
• Transition condition for serial
transition
• Transition condition after
selection branching
Number of
parallel
• Transition
couplings: 2
condition after
parallel
Number of
coupling
parallel
couplings: 32
High Performance model
QCPU
QnCPU QnHCPU
280µs 120µs
780µs 350µs
300µs 130µs
2.5ms 1.1ms
4.5ms 2.0ms
1
60.5ms 26.2ms
MELSEC-Q
Process Redundant
CPU CPU
120µs 120µs
350µs 350µs
120µs 120µs
1.1ms 1.1ms
2.0ms 2.0ms
26.2ms 26.2ms
3 - 16