Akai AK-9000WIFI User Manual page 11

Remote Control Operation (Cont.)
Buttons Descriptions (Remote Control: Outside)
1 ON/OFF button
• Press this button to start of stop the unit.
Note: Pressing this button will clear any previously set functions, such as
the timer or sleeping function.
2 SPEED button
• Press this button to select the speed, as follows:
3 / button
• Press the
• Press the
• Press and hold the
within the 16°C to 32°C range.
4 COOL button
• Press this button to select cooling mode.
5 HEAT button
• Press this button to select heating mode.
6 SWING button (SWING and SWING
• Press this button to activate the up/down (left/right) swing function,
press it again to fix the position of the louvres.
Note:
* The up/down (left/right) setting is only valid in this mode, it will not affect
the louvre position in other modes.
* The up/down (left/right) swing has a memory function. It will keep the
primary setting in memory when switched off for the next time the unit is
switched on or selected from other modes.
button to increase the setting temperature by 0.5°C.
button to decrease the setting temperature by 0.5°C.
/ button to change the temperature quickly
After Sales Support
1300 886 649 |
)
info@tempo.org
11