BTX Technologies BookIT User Manual page 10

POWERING UP
POWER OVER ETHERNET
1 Plug an RJ45 network cable into the RJ45 port in the BookIT display.
DC ADAPTERS
1 Plug the adapter into the wall socket.
Plug the jack terminal on the adapter into the BookIT display.
2
CONNECTING TO THE NETWORK
ETHERNET
(Note: Connecting to a WiFi network will disable Ethernet. Turning on WiFi without connecting
to a network will leave Ethernet active.)
Plug an RJ45 network cable into the RJ45 port of the BookIT display.
1
2 Go to Android Settings.
3 In the Wireless & Networks section, select More.
4 Select Ethernet.
5 Turn on Ethernet by checking the checkbox in the Use Ethernet menu item.
6 Ethernet should default to DHCP. If you need to manually assign network settings,
select Advanced and uncheck the DHCP checkbox.
7 Enter your network information.
Wi-Fi
(Note: Connecting to a WiFi network will disable Ethernet. Turning on WiFi without connecting
to a network will leave Ethernet active.)
1 Go to Android Settings > WLAN
2 Turn on WLAN if it is off.
3 Select from available networks.
4 Type the password (if any) and tap connect.
DATE, TIME AND TIME ZONES
1 Go to Android Settings.
Select Date & Time
2
Select an Option
3
▶ Automatic Date & Time (use network-provided date & time)
▶ Automatic time zone (user network-provided time zone)
▶
Set Date (manually set the date)
▶
Set Time (manually set the time)
▶ Set Time Zone (manually set the time zone)
SETUP
10