Operational Instructions; Seat Adjustment - Stamina 7500 Owner's Manual

OPERATIONAL INSTRUCTIONS

SEAT ADJUSTMENT

Proper seat adjustment is important.
1. Loosen and pull the
SPRING PIN KNOB(47)
Tighten the
2. Sit on the seat and place your feet on the pedals. You should be able to move through a complete pedal
stroke without locking your knees or shifting your hips on the seat. The seat is too close to the pedals if
you have more than a slight bend in your knees at the bottom of the pedal stroke. The seat is too far from
the pedals if you have to completely straighten your knees at the bottom of the pedal stroke. Refer to the
illustration below.
CAUTION:
Do not attempt to adjust the seat while you are on the
1.
Always make sure that the
2.
REAR FRAME(4).
LOAD ADJUSTMENT
To increase the load, turn the
KNOB(31)
counterclockwise. There are eight levels for the load adjustment.
SPRING PIN KNOB(47),
after adjusting the seat to a new position.
SPRING PIN KNOB(47)
TENSION KNOB(31)
REAR FRAME(4)
then slide the
7500 EMR Premium Recumbent Bike.
is inserted into one of the adjustment holes in the
clockwise. To decrease the load, turn the
10
to adjust the seat.
TENSION