Stamina 7500 Owner's Manual page 7

ASSEMBLY INSTRUCTIONS
STEP 4
SEAT(7)
Attach the
(M6)(71).
Attach the
WASHERS(M6)(71).
and
STEP 5
RIGHT PEDAL(43)
NOTE: The
has right hand threads and is tightened by turning clockwise. The
on the end of the pedal shaft. The
turning counter clockwise.
RIGHT PEDAL(43)
Thread
pedal securely. Select the
strap. Snap the three hole end onto the inside edge of the
the outside edge of the
STRAP(44).
Select adjustment holes which allow your foot to be easily removed from the pedals.
Use the same procedure to attach the
LEFT PEDAL STRAP(42)
SEAT FRAME(6)
onto the
BACK CUSHION(8)
R
has stamped on the end of the pedal shaft. The
into the right side of the
RIGHT PEDAL STRAP(44)
RIGHT PEDAL(43)
LEFT PEDAL(41)
LEFT PEDAL(41).
onto the
BOLTS(M6 x 40mm)(57)
with
SEAT FRAME(6)
onto the
LEFT PEDAL(41)
CRANK(9)
which has
RIGHT PEDAL(43).
R
with the mark on the bottom of the
to the left side of the
7
BOLTS(M6 x 40mm)(57)
with
RIGHT PEDAL(43)
LEFT PEDAL(41)
has left hand threads and is tightened by
as shown. Use a wrench to tighten the
R
marked on the bottom side of the
Snap the other end onto
CRANK(9)
WASHERS
and
L
has stamped
RIGHT PEDAL
and snap the