Ethernet Connector - Simrad R2009 User Manual

40
5 NMEA 0183 (Serial 1)
• Port 1: 1x input, 1x output
• Port 2: 1x input
6 NMEA 0183 (Serial 2)
• Port 3: 1x input, 1x output
• Port 4: 1x input

Ethernet connector

The unit is equipped with an Ethernet port, which allows connecting the unit to your
network using the 5 pin Ethernet connector.
4
5
1
Unit socket (female)
Key Purpose
1 Transmit positive TX+
2 Transmit negative TX-
3 Receive positive RX+
4 Receive negative RX-
5 Shield
Power connection
The unit is designed to be powered by a 12 or 24 VDC system. It is protected against reverse
polarity, under voltage and over voltage (for a limited duration). A fuse should be fitted to the
positive supply; 2 A for the 9" model and 5 A for the 16" model.
1
2
Unit socket (male)
Key Purpose
1 -12/24 VDC
2 External alarm
Power control (R2009),
3 Return for blue wire isolated signal
(R3016)
4 +12/24 VDC
Wiring | R2009/R3016 User manual
3
2
Color
Blue/White
Blue
Orange/White
Orange
Bare
4
3
Color
Black
Blue
Yellow
Red
4
3
5
2
1
Cable plug (male)
1
4
2
3
Cable plug (female)