Cleaning; Troubleshooting - FANATEC CSL Elite Racing Wheel Manual

Clean only with a dry or slightly damp cloth. Using cleaning solutions may
damage your CSL Elite Racing Wheel.
The CSL Elite Racing Wheel must not be modified differently than described
in this manual. Endor® AG expressly prohibits analysis and utilization of the
electronics, hardware, software and firmware contained in the controller. In
case difficulties occur in connection with utilization of the CSL Elite Racing
Wheel, please use the following guide for elimination of errors. On the website
www.fanatec.com/support you will find further details and contact data.
If the CSL Elite Racing Wheel is not working properly:
Problem description
After firmware update of the CSL Elite Racing
Wheel the steering wheel is not properly
centered.
After firmware update of the CSL Elite Racing
Wheel the H-pattern shifter is not working
properly.
The driver window does not show the attached
steering wheel.
36

CLEANING

9

TROUBLESHOOTING

10
Solution
After doing a firmware update on the CSL Elite
Racing Wheel the wheel center position must be
manually calibrated. See chapter 'CSL Racing
Wheel Functions' 'Firmware and driver update'
of this manual for more details.
After doing a firmware update on the CSL Elite
Racing Wheel the H-pattern shifter must be man-
ually calibrated. See chapter 'CSL Elite Racing
Wheel Functions' 'Firmware and driver update'
of this manual for more details.
Make sure that you have updated your CSL Elite
Racing Wheel to the latest firmware version
which can be downloaded from
www.fanatec.com/ support.
Check the pins inside the quick release of
the steering wheel, these must not be bent or
damaged.
Try to use another steering wheel. If this is also
not detected the CSL Elite Racing Wheel might
be damaged.