FANATEC CSL Elite Racing Wheel Manual page 34

8.1.4 Switching modes
The CSL Elite Racing Wheel will start in "PlayStation
switch to other modes press the 'Mode' button once. The LED above the "
button will indicate the current operation mode (more colors can be shown with
other compatible platforms):
• Blue indicates „PlayStation
• Red indicates „PC* mode"
• Purple indicates „ClubSport Wheel Base V2 compatibility mode"
NOTE:
Wheel will remember the last active mode and will boot in the same mode
next time. Exception: After firmware update was done.
8.1.5 Shifter calibration mode
To enter the H-pattern shifter calibration
mode press buttons
Steering Wheel (PS4
time while H-pattern shifter is connected, see
picture on the right hand side:
For other Fanatec
refer to the corresponding quick guide for
more detailed information.
NOTE:
the shifter calibration automatically as soon as a non-calibrated H-pattern
shifter is connected and detected. The menu will guide you through the
calibration steps as described next below.
*PC compatibility not tested nor endorsed by Sony Interactive Entertainment LLC.
34
Once the mode was changed manually the CSL Elite Racing
+
version) at the same
TM
steering wheels please
®
After firmware update the CSL Elite Racing Wheel will request
4 mode"
®
of the CSL Elite
4 Mode" by default. To
®
"