Assembly And Installation; Attaching External Drives - D-Link DNR-202L User Manual

Section 2: Assembly and Installation

Assembly and Installation

Attaching External Drives

Step 1
Place the NVR on a non-slip flat surface.
Step 2
Attach an external USB HDD to the USB HDD1 port.
2
The NVR will mount the HDD and beep once.
Note: When you want to remove an HDD, press and hold the release button for at least three
seconds. The NVR will release the HDD and emit a long beep. You can now unplug the USB cable.
Step 3
Attach one end of the provided RJ45 network cable to the NVR. Attach the other end to your
network. The DNR-202L will test for an Internet connection. Once an Internet connection is
established, the blue LED will blink.
Note: If you do not connect an Ethernet cable, the DNR-202L will beep.
4 3
Step 4
Attach the provided power adaptor.
D-Link DNR-202L User Manual 8