Led And Buzzer Overview - D-Link DNR-202L User Manual

Appendix A: LED and Buzzer Definition
Key
USB1 button
USB2 button
Auto scan
button
Reset button
D-Link DNR-202L User Manual

LED and Buzzer Overview

LED Color
Power & Network LED Red
Blue
(Network)
USB1 LED Green
USB2 LED Green
Trigger Method
Press button for 3 seconds
Press key2 for 3 seconds button
Auto scan function- Press scan button for 3 seconds
Camera Echo function- Press scan button for 0.5 second
Press reset pin for 10 seconds
Status Description
Off Power down / Link Up
On Power on
Blinking FW update
Off Network failure
On Network Link Connected
Blinking Traffic
Off HDD1 disabled
On HDD1 enabled
Blinking Read / Write HDD1
Off HDD2 disabled
On HDD2 enabled
Blinking Read / Write HDD2
Description
Un-mount HDD1, Buzzer will beep (long).
USB1 LED off.
Un-mount HDD2, Buzzer will beep (long).
USB2 LED off.
Start auto scan IP Cameras in local network.
Buzzer will beep (long).
Echo IP Camera found (1 beep for 1st camera found,
2 beeps for 2nd, 3 beeps for 3rd, 4 beeps for 4th).
Buzzer will beep (short).
Reset to factory default.
Buzzer will beep (long).
61