Section 5: Configuration
Configuration
Using the Configuration Interface
After completing the Setup Wizard, you are ready to use your NVR. The NVR's built-in web configuration utility is designed to
allow you to easily access and configure your DNR-202L. At the end of the wizard, click Go to NVR, or enter the IP address of
your camera into a web browser, such as Internet Explorer. To log in, use the username admin and the password you created
in the Setup Wizard. If you did not create a password, the default password is blank. After entering your password, click OK.
Step 2
Enter your credentials to access the configuration interface.
2
D-Link DNR-202L User Manual
36