Download  Print this page
   

Advertisement

How to enable or disable manual recording of DNR-202L?
Note: You may download :
-
required Firmware
-
run the suitable OS wizard setup from
current IP address assigned to the device from your router:
Locate and run the downloaded Setup Wizard on your computer. Click on START to proceed.
Technical Support Setup Procedure
http://sg.mydlink.com/support
which will display the
Page | 1

Advertisement

Table of Contents

   Also See for D-Link DNR-202L

   Related Manuals for D-Link DNR-202L

   Summary of Contents for D-Link DNR-202L

  • Page 1 Technical Support Setup Procedure How to enable or disable manual recording of DNR-202L? Note: You may download : required Firmware run the suitable OS wizard setup from http://sg.mydlink.com/support which will display the current IP address assigned to the device from your router: Locate and run the downloaded Setup Wizard on your computer.
  • Page 2 Technical Support Setup Procedure Ensure that the network ports, HDD(s) and corresponding devices’ power adaptors are connected and are powered on. Click Next till the current IP address is displayed next to the desired DNR-202L. Page | 2...
  • Page 3 Technical Support Setup Procedure Step 1: Open an Internet browser (such as Internet Explorer) and enter http://< IP Address> into the address bar. Step 2: Enter your login information. If you have not changed the default settings, the username is Admin and the password field should be left blank.

Comments to this Manuals

Symbols: 0
Latest comments: