Technical Support Setup Procedure How to disable buzzer or beeping on DNR-202L? Note: You may download : required Firmware run the suitable OS wizard setup from http://sg.mydlink.com/support which will display the current IP address assigned to the device from your router: Locate and run the downloaded Setup Wizard on your computer.
Technical Support Setup Procedure Ensure that the network ports, HDD(s) and corresponding devices’ power adaptors are connected and are powered on. Click Next till the current IP address is displayed next to the desired DNR-202L. Page | 2...
Technical Support Setup Procedure Step 1: Open an Internet browser (such as Internet Explorer) and enter http://< IP Address> into the address bar. Step 2: Enter your login information. If you have not changed the default settings, the username is Admin and the password field should be left blank.