Adding Cameras Using The Setup Software - D-Link DNR-202L User Manual

Mydlink camera video recorder
Hide thumbs Also See for DNR-202L:
Table of Contents

Advertisement

Section 2: Assembly and Installation

Adding Cameras using the Setup Software

Step 1
Insert the Installation CD-ROM into your computer's optical drive to start the
autorun program.
The CD-ROM will open the Setup Wizard. The Setup Wizard will guide you through
the installation process of adding a camera to the NVR.
At the welcome page, click on the Skip button.
Note:
If the autorun program does not automatically start on your computer, go to
Windows and click Start > Run. In the Run command box type D:\autorun.exe,
where D: represents your CD-ROM drive.
Step 2
Follow the on screen prompts to ensure the device is plugged in and powered on.
D-Link DNR-202L User Manual
15

Advertisement

Table of Contents
loading

Table of Contents