Section 5: Configuration
This section will allow you to configure and modify the audio and video parameters for each camera.
Step 1: Select the camera which you would like to modify from the camera list.
Step 2: NVR will display the parameters for the selected camera. You can modify
the information on this page.
The name of the camera.
Select the video format the camera supports.
Select the frame rate.
Select the resolution.
Select the image quality.
Check the Enable Audio option for live view and recording
Go to Web:
Click to connect to the web page of the selected network camera for advanced
setup. For example, motion detection should be configured via the camera
web interface to enable the NVR to receive the trigger message.
Step 3: Click the Save Settings button.
Note: The system will adjust the frame rate automatically based on the maximum frame rate
which that camera can support.
D-Link DNR-202L User Manual
Audio and Video