Unit Control - Telrad BreezeCOMPACT System Manual

Table of Contents

Advertisement

Chapter 3 - Operation and AdministrationBTS Menu
Chapter 3 - Operation and Administration
The QoS Marking Rules parameters are:
802.1P Priority
DSCP
3.5.2.5.1
802.1P Priority
The 802.1P (VLAN) Priority of management traffic.
The range is 0-7.
The default is 0.
3.5.2.5.2
DSCP
The DSCP value of management traffic.
The range is 0-63.
The default is 0.
3.5.3

Unit Control

The Unit Control menu enables various general control functions such as resetting the BTS, managing
the SW versions of the BTS and uploading/downloading configuration backup files.
The Unit Control menu includes the following options:
Monitor Inactivity Timeout
SW Version Control
ShutDown Operation
Configuration Files Control
TFTP Server
3.5.3.1
Monitor Inactivity Timeout
The Monitor Inactivity Timeout (min.) parameter determines the amount of inactive time following
which the unit automatically exits the Monitor program.
The time out duration can range from 0 to 60 minutes. 0 means no inactivity timeout.
The default value is 10 minutes.
3.5.3.2
SW Version Control
The BTS can contain two SW versions:
Operational: Each time the BTS resets it will reboot using the version defined as Operational.
Shadow: Normally the Shadow version is the backup version. Each time a new SW File is downloaded
to the BTS, it will be stored as a Shadow version, replacing the previous Shadow Version.
The typical process of upgrading to a new SW version includes the following steps:
BreezeCOMPACT System Manual
BTS Menu
50

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents