Select - Telrad BreezeCOMPACT System Manual

Chapter 3 - Operation and AdministrationBS Menu
Chapter 3 - Operation and Administration
with Paging Group ID of 0 (Idle Mode disabled) and units with Paging Group ID other than 0 (Idle Mode
enabled) should be avoided.
3.7.2

Select

Select the BS to view or update its parameters or to delete it. BS is selected by its BS Number.
The selected BS menu includes the following options:
General
Air Frame Structure
Mobility
Power Control
Feedback
Connectivity
Connectivity
Management Thresholds
Keep Alive
Scheduler
3.7.2.1 General
The selected BS General parameters menu includes the following options:
Show: Select to view the current values of the BS General parameters.
Update: Select to update the configured values of the BS General parameters.
Delete: Select to delete the BS (the BS ID LSB of an existing BS cannot be modified. To change it you
must delete the BS and re-define it).
The BS General parameters are:
BS ID LSB
Operator ID
Name
Calculated Center Frequency
Calculated Bandwidth
Paging Group ID
3.7.2.1.1 BS ID LSB
Available only in Show menu (the BS ID LSB of an existing BS cannot be modified). The unique identifier
of the BS in the network. Can be configured only during BS creation (see
BreezeCOMPACT System Manual
BS Menu
Section 3.7.1.2).
62