Toyota HILUX 1993 Repair Manual page 367

MANUAL TRANSMISSION –
2. INSTALL ENGINE REAR MOUNTING
Torque: 25 N–m (260 kgf–cm, 19 ft–lbf)
3. (Regular Cab w/ Planetary Gear Type Transfer)
INSTALL DYNAMIC DAMPER
Torque: 37 N–m (380 kgf–cm, 27 ft–lbf)
4. ( 22R–E/G 58)
INSTALL BREATHER HOSE
Connect the breather hose for transfer upper cover and
transmission control retainer as shown.
Hose depth: 13 mm (0.51 in.)
5. PLACE TRANSMISSION WITH TRANSFER AT
INSTALLATION POSITION
(a) Support the transmission with a jack.
(b) Align the input shaft spline with the clutch disc, and
push the transmission with the transfer fully into po–
sition.
6.–1 (3VZ–E)
INSTALL TRANSMISSION BOLTS, STIFFENER BOLTS
AND STARTER
Torque:
(A) Transmission bolt
(B) Stiffener plate bolt
(C) Starter bolt
Installation of Transmission with Transfer
72 N–m (730 kgf–cm, 53 ft–lbf )
37 N–m (380 kgf–cm, 27 ft–Ibf)
39 N–m (400 kgf–cm, 29 ft–Ibf)
MT1–21