MANUAL TRANSMISSION
–
12. LOWER VEHICLE
13. INSTALL SHIFT LEVER
(a) Apply MP grease to the shift lever.
(b) Align the groove of the shift lever cap and the pin
part of case cover.
(c) Cover the shift lever cap with a cloth.
(d) Then, pressing down on the shift lever cap, rotate it
clockwise to install.
(e) Install the shift lever boot and retainer with four
screws.
14. INSTALL FAN SHROUD SET BOLTS
Install and torque the four bolts.
15. CONNECT BATTERY CABLE TO NEGATIVE TERMINAL
16. PERFORM ROAD TEST
Check for abnormal noise and smooth operation.
Installation of Transmission
MT1–13