Backlight Settings; Viewing Certificate Details - Toshiba TM5-E01 User Manual

Settings
NOTE: Your Device ID should start with a
letter and contain only a combination of the
letters A to Z, numbers 0 to 9, and underscore
and hyphen characters.
NOTE: The Device ID is used to identify your
Toshiba phone in the following situations:
• Synchronising with PC.
• Connecting to a network.
• Restoring information from a back up.
• Bluetooth partnership.
• Data exchange via beaming.
6. Tap ok.

Backlight settings

You can set the backlight to dim after a specific
amount of time has elapsed.
To change the backlight settings:
1. From the Today screen, tap Start > Settings.
2. Tap the System tab.
3. Tap Backlight.
4. On the Battery Power tab, you can select when
to turn off and on the backlight when using
battery power, and specify the time delay.
86
5. On the External Power tab, you can select
when to turn off and on the backlight when
using external power, and specify the time
delay.
6. On the Brightness tab, you can adjust the
brightness of the screen. You can also tick the
Adjust brightness of the screen
automatically. checkbox to enable to adjust
the brightness automatically.
7. Tap ok when you have finished.

Viewing certificate details

To view certificate details:
1. From the Today screen, tap Start > Settings.
2. Tap the System tab.
3. Tap Certificates. On each tab, the certificate
names, along with their issuing authority and
expiry date, are displayed.