Beams - Toshiba TM5-E01 User Manual

Connectivity
8. To use this COM port to communicate only with
devices with which your Toshiba phone has a
Bluetooth partnership, tick the Secure
Connection checkbox.
9. Tap Finish, then tap ok.

Beams

The term 'beam' is used to describe the short range
transfer of data between two devices via a
Bluetooth connection.
Beaming an item
To beam Calendar, Contacts, Tasks, and
Pictures & Videos files and data to other devices:
1. Tap the item you want to beam, such as an
appointment in Calendar or a task in Tasks.
2. Tap Menu, and then tap the menu item for
beaming the item, for example Beam
Appointment...
3. Tap the device to which you want to send the
item.
100
Configuring your Toshiba phone to
receive beamed data
To configure your phone to receive beamed data:
1. From the Today screen, tap Start > Settings.
2. Tap the Connections tab.
3. Tap Beam.
4. Make sure that the Receive all incoming
beams. checkbox is ticked. Remove the tick if
you do not want to receive incoming beams.
5. Tap ok.
Receiving beamed data
To receive beamed data:
1. Ensure that your Toshiba phone is set to
Visible mode in the Bluetooth settings, and is in
range of the device beaming the data.
2. You are notified when data is being received on
your Toshiba phone. To stop receiving the data,
tap Cancel.
3. Once the data has transferred, tap Yes to save
it or No to discard it.