Switch Plate; Know Your Machine - U.S. Products COBRA-300H Operating Instructions Manual

SWITCH PLATE

VACUUM (1), PUMP (2)SWITCHES:
These switches are powered by cord #1. Switches light up when turned on.
CARPET/UPHOLSTERY SWITCH (3):
This switch is also powered by cord #1. The carpet setting (down position) is high pressure
(approximately 300 PSI). The upholstery setting (up position) is low pressure (approximately 50 PSI
with a K1 or V2 spray tip).

KNOW YOUR MACHINE

HOLDING TANK LID
VAC INTAKE
LATCH (2)
WHEEL
VENT
1 2
VAC PUMP
SWITCH PLATE
CASTOR
FORM NO. 56041891 - 4
UPHOLSTERY
3
CARPET
LID (RECOVERY TANK)
POSITION FOR PRIMING
QUICK-DISCONNECT
PRIMING HOSE IN
DRAIN GATE