1. Manuals
  2. Brands
  3. U.S. Products Manuals
  4. Floor Machine
  5. KING COBRA 310
  6. Information & operating instructions

U.S. Products KING COBRA 310 Information & Operating Instructions

Hide thumbs Also See for KING COBRA 310:
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
KING COBRA
310
®
120V
INFORMATION
&
OPERATING
INSTRUCTIONS
DO NOT OPERATE MACHINE UNTIL YOU HAVE READ
ALL SECTIONS OF THE INSTRUCTIONS
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2. Keep machine from rain and snow, extremes in temperatures, and store in a
heated location. Use the machine indoors. Do not use outdoors.
3. Do not let the pump run dry.
4. Use approved chemicals only. NO SOLVENTS.
5. Wear gloves or use rags when removing quick disconnects to prevent burns.
6.5.2007

Advertisement

Table of Contents
loading

Related Manuals for U.S. Products KING COBRA 310

Summary of Contents for U.S. Products KING COBRA 310

  • Page 1 KING COBRA ® 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage. 2.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: NOTE: Read all instructions before using this machine.

  • Page 3: Cleaning Solutions

    U.S. Products “X-1500” is recommended. Lubricate the wheels, castors, and quick disconnects with an all purpose silicone spray. The vacuum and the pump do not require any maintenance.

  • Page 4: Operation

    NOTE: This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. Record the serial number and model of your new extractor here: (and be sure to mail your warranty card) Serial Number: __________________ Model: KING COBRA-310 Purchase Date:_____________...
  • Page 5 REFER TO THE DIAGRAMS ON THE PREVIOUS PAGE Connect the priming hose to the machine, turn the pump ON (2) and prime the air out of the pump. When the water is clear (no air in it) turn the pump off and remove the priming hose. NOTE: if priming is difficult, place the open end of the priming hose into the vacuum inlet hose barb, and turn the vacuum on (6).
  • Page 7 KING COBRA-310 EXTRACTOR 120V PART LIST 240V ITEM PART No. DESCRIPTION ITEM PART No. DESCRIPTION Chain, lid, 8” Louver, 3”, includes screws 901B Lid, solution tank FP348C Hose, pump to heater HKCR1 Holding tank, white FP357 Heat exchanger, complete, 120V 1088 Glide, teflon FP359...

  • Page 8: Specifications

    KING COBRA ® 120V SPECIFICATIONS: Rotomolded Body: Lifetime Warranty 7.2” 3-stage Vacuum: Ball float VAC Shutoff: Positive displacement, selectable Pump: pressure setting 140” Waterlift: Instant to 212 Heat: º 2000 Watts Heater: Stainless steel, double bend, twin tip Wand: 129 lbs. Weight: 800-257-7982 •...

Table of Contents