SWITCH PLATE
MODEL (1):
This identifi es the model
of your Advantage
machine.
VACUUM SWITCH (2):
This push-button switch
turns on the vacuum.
The switch will illuminate
when it is on.
PUMP SWITCH (3):
The pump switch will illuminate when it is activated, and it will turn on the pump.
HEAT SWITCH (4):
The heat switch will illuminate when it is activated and will turn on the heater. NOTE: if the green, two-circuit
indicator light is not turned on, you may have both power cords on the same circuit and this can trip the circuit
breaker in the wall.
YOUR MACHINE
Vacuum Hose
Connection
Solution
Output
Connection
FORM NO. 56041942 - ADVANTAGE 400H
1
MODEL
Recovery Tank
Lid
Recovery
Tank
Drain
I
I
2
3
O
O
Switches
Castor
4
I
4
O
Solution Tank
Access
Power Cords
12" Wheel
revised 11/11