Summary of Contents for U.S. Products KING COBRA 300
Page 1
KING COBRA ® 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage. 2.
IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: NOTE: Read all instructions before using this machine.
U.S. Products “X-1500” is recommended. The vacuum motor, pump motor, and the pump do not require any scheduled maintenance; however, the motors may require replacement brushes after 1000 - 1500 hours, and the pump and bypass valve may require rebuild kits after 1000 - 1500 hours, typically (refer to machine part list for numbers).
NOTE: This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offices other than normal residential housekeeping purposes. Record the serial number and model of your new extractor here: (and be sure to mail your warranty card) Serial Number: __________________ Model: KING COBRA-300...
Page 5
REFER TO THE DIAGRAMS ON THE PREVIOUS PAGE Connect the priming hose to the machine, turn the pump ON by turning the pump pressure knob (4) up to increase pump speed, and prime the air out of the pump. When the water is clear (no air in it) turn the pump off, and remove the priming hose.
Page 7
KING COBRA-300 EXTRACTOR PART LIST 240V 120V ITEM PART No. DESCRIPTION ITEM PART No. DESCRIPTION 2014 Fan, cooling, 120V Chain, lid, 8” 2018 Fan, cooling, 240V 901B Lid, solution tank 2015 Guard, fan HKCR1 Holding tank 908A Latch, draw, rubber 1088 Glide, teflon Louver, 3”, includes 3 screws...