1. Manuals
  2. Brands
  3. U.S. Products Manuals
  4. Floor Machine
  5. KING COBRA 150
  6. Information & operating instructions

U.S. Products KING COBRA 150 Information & Operating Instructions

120v
Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
KING COBRA
150
®
120V
INFORMATION
&
OPERATING
INSTRUCTIONS
DO NOT OPERATE MACHINE UNTIL YOU HAVE READ
ALL SECTIONS OF THE INSTRUCTIONS
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2. Keep machine from rain and snow, extremes in temperatures, and store in a
heated location. Use the machine indoors only.
3. Do not let pump run dry.
4. Use approved chemicals only. NO SOLVENTS.
5. Wear gloves or use rags when removing quick disconnects to prevent burns.
6. Never use water over 130 °F/ 54°C in the solution tank.
03-09-09

Advertisement

Table of Contents
loading

Related Manuals for U.S. Products KING COBRA 150

Summary of Contents for U.S. Products KING COBRA 150

  • Page 1 KING COBRA ® 120V INFORMATION & OPERATING INSTRUCTIONS DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THE INSTRUCTIONS IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage. 2.

  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS This machine is only suitable for commercial use, for example in hotels, schools, hospitals, factories, shops and offi ces other than normal residential housekeeping purposes. When using any electrical appliance, basic precautions should always be followed, including the following: NOTE: Read all instructions before using this machine.

  • Page 3: Cleaning Solutions

    INSPECTION: Carefully unpack and inspect your KING COBRA-150 for shipping damage. Each machine is tested and inspected before shipping. Any shipping damage incurred is the responsibility of the carrier. You should notify the carrier immediately if you notice damage to the box or to the machine or parts. CLEANING SOLUTIONS: We recommend liquid cleaning chemicals.

  • Page 4: Switch Plate

    SWITCH PLATE CIRCUIT LOCATOR LIGHT INDICATES TWO CIRCUITS. HEATER WILL AUTOMATICALLY RED LIGHT INDICATES VACUUM 1 TURN ON HEATER IS HEATING ON / OFF SWITCH VACUUM 2 ON / OFF SWITCH BYPASS PUMP SWITCH ON / OFF SWITCH 212° F Recovery Dump Hose Tank Lid...

  • Page 5: Operation

    OPERATION Inspect the machine, hoses, and cleaning tools for cleanliness and completeness. Fill the solution tank with water. Using warm water may be a benefi t in cleaning effectiveness, but do not use hot water (above 130 F/54 C) in the tank. °...
  • Page 7 KING COBRA-150 120V PART LIST ITEM PART No. DESCRIPTION ITEM PART No. DESCRIPTION Hose clamp BKCR-BLK Base, KC, black, 1060B Hose, dump Louver, 3” 908A Latch CWKC-BLK Cord wrap 2014 Fan, 100CFM, Cooling FP345 Switch, SPST VKCR1 Tank, vacuum, white 2015 Guard, fan Light, green, 120V...

  • Page 8: Maintenance Schedule

    MAINTENANCE SCHEDULE CLEAN ALL FILTERS CHECK POWER CORD FLUSH OUT with DESCALER REPLACE VAC MOTOR BRUSHES Around 1500 hours TROUBLE SHOOTING: IF THIS OCCURS CHECK THIS NO SPRAY Solution tank is empty. Clogged spray tip. Pump not running. Valve on wand not operating PUMP DOES NOT RUN No power to pump.

This manual is also suitable for:

Kc-150

Table of Contents