Front Panel - M2TECH CROSBY User Manual

M2Tech
CROSBY
STEREO POWER AMPLIFIER
REVISION P A – SEPTEMBER 2017
www.m2tech.biz
R

2. Front Panel

Figure 1
1) Overcurrent LED (red). It's on when the CROSBY is trying to deliver too high a current to
the load. Reduce volume to keep the CROSBY within its normal operative current limits.
2) Operation LED (white). It's on when the amplifier is operating.
3) Standby LED (blue). It's on when the CROSBY is in standby.
4) Overtemperature LED (red). It's on when the CROSBY is too hot to operate safely.
Reduce volume to keep the CROSBY within its normal operative temperature limits.
Copyright © 2017, M2Tech Srl
9