Specifications - M2TECH CROSBY User Manual

CROSBY
STEREO POWER AMPLIFIER
REVISION P A – SEPTEMBER 2017
R

9. Specifications

Input sensitivity: ................................ 1.25Vrms (single-ended and balanced)
Output power: ................................... 60W
Residual noise: ................................. 30uVrms (20Hz-20kHz, A weighted)
SNR: ................................................. 112dB (A-weighted)
THD+N:............................................. 0.003% (1Wrms on 4 Ohms)
IMD: .................................................. 0.0009% (10Wrms, 18.5kHz+1kHz)
TIM:................................................... 0.007% (10W)
Mains voltage:................................... 90-130V
Power consumption: ......................... 615VA
Fuse:................................................. slow blow 3.15A or 6.3A
Input:................................................. IEC socket with fuse holder
Size:.................................................. 200x50x200mm (w x h x d)
Weight............................................... 2.1kg (device and ancillaries)
p.c. (stereo, 8 Ohms)
rms
110W p.c. (stereo, 4 Ohms)
rms
180W (mono, 8 Ohms)
rms
350W (mono, 4 Ohms)
rms
or 180-260V
AC
2.6kg (packed)
17
M2Tech
www.m2tech.biz
(internally set), 50/60Hz
AC
Copyright © 2017, M2Tech Srl