Page 3
For more in-depth information on the disposal of this product, please contact M2Tech Srl. WARNING: The information in this manual is believed to be reliable and accurate. M2Tech reserves the right to change or modify this information at any time, without notice. Dear customers, we invite you to ensure that you are consulting the most recent version of this manual.
Page 4
The Classic Integrated Amplifier has been designed to provide absolutely excellent performance at an entry- level price. We are sure that the Classic Integrated Amplifier will fully meet your expectations: your hi-fi system will show an incredible increase in its sonic performance, so get ready now for a totally new listening experience!
If one or more items are missing, contact your dealer. Remove the Classic Integrated Amplifier from the stratocell and place it on a stable base, away from heat sources. Avoid direct sunlight. Leave ample space around the appliance to ensure adequate ventilation.
Standby LED. It is lit when the Classic Integrated Amplifier is in standby. Mute LED (“MUTE ON”). It is lit when the Classic Integrated Amplifier is muted. Muting button (“MUTING”). Pressing this button mutes the amplifier without needing to touch the volume knob.
Similarly, via the trigger output it is possible to turn on another component of the system using the voltage sent by the Classic Integrated Amplifier. This function is useful, for example, when using the Classic Power Amplifier to bi-amplify the speakers: when you turn on the Classic Integrated Amplifier, the Classic Power Amplifier automatically turns on too.
4. Remote Control The Classic Integrated Amplifier comes with a versatile remote control that allows you to adjust all its controls, as well as control other M2Tech Classic Series and Rockstars Series products. Note that when a command is sent to the Classic Integrated Amplifier the “AMP”...
NOTE: The trigger input operates in parallel with the main power switch, so the main power switch must not be operated if you want the trigger to turn the Classic Integrated Amplifier on and off at mains power level. If the Classic Integrated Amplifier's main power switch is pressed, the trigger will affect the amplifier's standby state.
Classic Integrated Amplifier. This voltage is turned on when the Classic Integrated Amplifier is turned on or put out of standby and is turned off when the Classic Integrated Amplifier is turned off or put into standby.
REVISION P – May 2024 connection data to that network and then order the Classic Integrated Amplifier to reset the interface to connect to the network. Pressing the “STANDBY” button when switching on causes the interface to be reset if it is necessary to connect it to a different network.
Need help?
Do you have a question about the Classic Integrated Amplifier and is the answer not in the manual?
Questions and answers