Checking Battery Capacity - Projecta HP2012 HP2200 User Manual

CHECKING BATTERY CAPACITY

The jumpstarter is equipped with a LCD DIGITAL DISPLAY. When the BATTERY
VOLTAGE STATUS button is pressed the display will indicate the battery voltage level.
To check the battery capacity :
Step 1 Disconnect any appliance and accessories that might be running from
the jumpstarter, as this will effect the reading. Ensure the jumpstarter
is not being charged.
Step 2 Press the battery voltage button and read the LED voltage display
(displayed as volts).
Step 3 Refer to the table below for the conversion of volts to battery capacity
as a percentage.
Battery Capacity
100%
75%
50%
25%
0%
14
Battery voltage reading (12V)
12.6 Volt or greater
12.4 Volt
12.2 Volt
12.0 Volt
11.0 Volt
Battery voltage reading (24V)
25.2 Volt
24.8 Volt
24.4 Volt
24.0 Volt
22.0 Volt