Wireless Security - Tenda A300 User Manual

AP Isolation: W hen it's enabled, clients connected to the same SSID will
4.
be isolated.
5. Channel: For optimal wireless performance, you may select the least
used channel. It is advisable that you select an unused channel from the
drop down list, or "Auto" to let the range extender detect and select the
best possible channel for your wireless network to ope rate on.
6. Channel Bandwidth: Select a proper channel bandwidth to enhance
wireless performance. Available only in 11b/g/n mixed mode.
7. Extension Channel： Available only in 11b/g/n mixed mode.
8. WMM-Capable: W MM is QoS for your wireless network. Enabling this
option may better stream wireless multimedia data (such as video or
audio).
9. ASPD Capable： Select to enable/disable the auto power saving mode.
We recommend you disable it.
Tip --------------------------------------------------------------------------------------
1. The default primary SSID is Tenda_XXXXXX. XXXXXX is the last 6
characters of the MAC address, which you can get from the label on the
device.
2. If you are not familiar with these configurations, it is advisable that only
the primary SSID and chann el should be modified.
-----------------------------------------------------------------------------------------------

3.3.2 Wireless Security

This section allows you to encrypt your wireless network to block
unauthorized accesses and malicious packet sni ffing.
To secure your wireless network:
1. Select the SSID you wish to secure;
2. Configure its security mode, WPA Algorithms and security key;
3. Click OK to save your settings.
Chapter 3 Advanced Settings
17