Place The Wireless Extender - Tenda AV1000 User Manual

 Pair Button
Press and then release it to start pairing process.
Press and hold it for about 1 second to wake up the extender from standby mode.
 WiFi Button
Press and then release it to start WiFi cloning if the WiFi is enabled.
Press and hold it for about 6 seconds to disable WiFi.
Press and hold it for about 1 second to enable WiFi if the WiFi is disabled before. After the WiFi is
enabled (WiFi LED indicator turns solid green), press and then release the WiFi button to start WiFi
cloning.
 Reset Button
Press and hold it for about 6 seconds to restore the extender to factory default.
 Ethernet Ports
Connect them to Ethernet devices (computer, router, etc.) using Ethernet cable.

1.3 Place the Wireless Extender

Plug the powerline extender directly into a wall socket. Do not plug the powerline extender into a
power strip or extension cord.
Avoid plugging powerline extenders near the appliances that consume a lot of power, such as
washers, dryers, or electric kettle.
3 3
Get to Know Your Extender