Table of Contents
Advertisement
8.
WMM-Capable: W MM is QoS for your wireless network. Enabling this
option may better stream wireless multimedia data (such as video or
audio).
9.
ASPD Capable： Select to enable/disable the auto power saving mode.
We recommend you disable it.
10. TX Power: Select low, medium or high transmission power according to
different situations.
Tip --------------------------------------------------------------------------------------
1.The default primary SSID is Tenda_X XXXXX. XXXXXX is the last 6
characters of the MAC address, which you can get from the label on the
device.
2.If you are not familiar with these configurations, it is advisable that only the
primary SSID and channel should be modified.
-----------------------------------------------------------------------------------------------
3.2 Wireless Security
This section allows you to encrypt your wireless network to block
unauthorized accesses and malicious packet sniffing.
To secure your wireless network:
1. Select the SSID you wish to secure;
2. Configure its security mode, WPA Algorithms and security key;
3. Click OK to save your settings.
1.
Open： W ireless speed can reach up to 54Mbps if Open is selected.
2.
Shared: W ireless speed can reach up to 54Mbps if Shared is selected.
3.
Default Key: Select a key to be effective for the current W EP encryption.
For example, if you select Key 1, wireless client s must join your wireless
network using this Key 1.
4.
WPA-PSK： W PA personal, supports AES, TKIP and TKIP+AES cipher
types. Note: Usually TKIP&AES is not optional.
5.
WPA2-PSK： W PA2 personal, support AES , TKIP and TKIP+AES cipher
Chapter 3 Advanced Settings
20
Advertisement
Table of Contents
