Parallel Operation (Appendix C); Setting Ds2 And Ds1 For Parallel Operation; 9Kva Parallel System - Victron energy Phoenix MultiPlus 24/3000/70 User Manual

Parallel operation (appendix C)

Step 1: Setting ds2 and ds1 for parallel operation
Master
DS-8 AC input Set
DS-7 AC input Set
DS-6 AC input Set
DS-5 AES na
DS-4 Ch. current Set
DS-3 Ch. current Set
DS-2 Master
DS-1 Master
The current settings (AC current limitation and charging current) are multiplied by the
number of devices. However, the AC current limitation setting when using a remote
panel will always correspond to the value indicated on the panel and should not be
multiplied by the number of devices.
Example: 9kVA parallel system
- If an AC input current limitation of 20A is set on the master and the system
consists of three devices, then the effective system current limitation will be
equal to 3 x 20 = 60A.
- If a 30A panel is connected to the master, the system current limitation is
adjustable to a maximum of 30A, regardless of the number of devices.
- If the charging current on the master is set to 100% (70A for a Multi
24/3000/70) and the system consists of three devices, then the effective
system charging current is equal to 3 x 70 = 210A.
The settings according to this example (9kVA parallel system with 30A Multi Control
Panel) are as follows:
Master
DS-8 na (30A panel)
DS-7 na (30A panel)
DS-6 na (30A panel)
DS-5 AES na
DS-4 Ch. current 3x70A
DS-3 Ch. current 3x70A
DS-2 Master
DS-1 Master
To store the settings after the required values have been set: press the 'Up' button of
the master for 2 seconds (upper button to the right of the DIP switches, see appendix
A, position K). The overload and low-battery LED's will flash to indicate
acceptance of the settings.
28
DS-8 na
DS-7 na
DS-6 na
DS-5 na
DS-4 na
DS-3 na
off DS-2 Slave 1
on DS-1 Slave 1
DS-8 na
DS-7 na
DS-6 na
DS-5 na
on DS-4 na
on DS-3 na
off DS-2 Slave 1
on DS-1 Slave 1
Slave 1
off
off
Slave 1
off
off
Slave 2 (optional)
DS-8 na
DS-7 na
DS-6 na
DS-5 na
DS-4 na
DS-3 na
DS-2 Slave 2
DS-1 Slave 2 on
Slave 2
DS-8 na
DS-7 na
DS-6 na
DS-5 na
DS-4 na
DS-3 na
DS-2 Slave 2
DS-1 Slave 2 on
off
off