Settings - ATN OTS-HD Series Manual

SLEEP MODE
Sleep mode is activated when your scope is not in use for a set period of time
(example: 1-60min). During sleep mode the display and some of the sensors will
be inactive.
To get out of Sleep mode and get back to normal operations just physically move
the device or press any of the buttons.
• Mode — allows you to switch the mode (ON/OFF)
• Hibernation Time — can be 1 – 60 min

SETTINGS

• Date — enter the date.
• Time — enter the time.
• Time Zone — allows you to choose a geographical region with standard time.
WiFi — values are not changeable.
• SSID
• Password
• MAC Address
RECORD GEO-TAGGING — adding geographical identification to your videos
(ON/OFF).
LENSE TYPE — to make all features work correctly you need to choose the type
of your lense (Example: 2x stands for 2–8x and 9x stands for 9–36x).
ZOOM — allows you to choose different types of zoom (Standard, Extended).
Extended Zoom will give an electronic zoom of 10x your optical Zoom.
Example: 2–8x in Extended mode becomes 8– 20x. However, we would like to
caution you that you will begin to see considerable pixelation at such a zoom.
RESTORE FACTORY SETTINGS — allows to reset all the settings to default.
FIRMWARE VERSION — allows you to learn on the firmware version currently
running on your sight.
We recommend that you register your product on our home page (www.atncorp.
com/firmware) in order to make sure that you are getting emails when new firmware
versions become available.
We are constantly working on new features, functions, and improvements that we
provide to you free of charge via firmware upgrades.
22
UNITS — can be Metric or
Standard system.
DATE AND TIME
• Clock Source — allows
you to choose different types of
sources to improve the accuracy
(Manual, WiFi or GPS).
• Date Format — can be
YYYY-MM-DD, MM-DD-YYYY,
DD-MM-YYYY.
• Time Format — form of stat-
ing the time (24-hour or 12-hour).