Table of Contents
Advertisement
NOTE
If the device does not restart within 30 seconds, remove and re-insert the
batteries and power-up the device.
Once the device has been updated you will need to either format the card or
delete the update file manually. In the event you do not, the system will ask you
if you wish to update the device every time you turn it on.
ON/OFF
To TURN ON the device press
and hold the POWER button until
you see the ATN splash screen.
To TURN OFF the device press
and hold the POWER button, until
the dialog box "Shut down the
device?" appeares. Choose "Yes"
to turn off.
NOTE
Upon startup you must perform a NUC.
USING KEYPAD
The KEYPAD is programmed to be used in
two different ways:
• Short and Quick Taps — used for most
functions and to get around the menu;
• Press and Hold — designed to be used
on the following situations — ON/OFF, ZOOM,
SHORTCUT MENU.
NOTE
Using LEFT or RIGHT buttons in menu you
can quickly choose Exit Shortcut from any
position.
FOCUSING
DIOPTER ADJUSTMENT
By rotating the Diopter Adjustment Ring you
will achieve optimal sharpness for your vision.
We recommend that you first turn on the Car-
ousel by clicking Enter button and optimizing
your focus by making sure the Icons are sharply
displayed.
NOTE
You do not take the rubber cap off the
objective lens.
You should not need to re-adjust the Diopter Adjustment unless another
user with different vision than yourself will be using the device.
DIOPTER
ADJUSTMENT RING
9
Advertisement
Table of Contents
