ATN OTS-HD Series Manual page 19

NOTE
During the measurement process, you can zoom in and out using standard
buttons (UP and DOWN).
If the Target Height is incorrect
you can change it:
• Press the RIGHT button
to enter the Menu;
• Choose one of the presets
or input the height manually;
• Ac cept the height with
CENTER button
back to the Main Screen.
DISTANCE ENTRY
Allows you to input or cor-
rect the distance manually. To
launch you should choose it in
the Shortcuts .
Change distance value using
UP and DOWN buttons
accept the new distance press
CENTER button
and go
. To
.
19