Connecting To A Mixer-Output [L] [R] Jacks (Balanced) - Yamaha AvantGrand N3X Owner's Manual

Connections
Using an External Stereo System for Playback—AUX OUT [L/L+R] [R] jacks (unbalanced)
These jacks let you connect the instrument to external powered speaker systems, for
playing in larger venues at higher volumes.
Instrument
AUX OUT
Phone plug
(standard)
NOTICE
• To avoid possible damage to the devices, first turn on the power to the instrument, then to the external device. When turning
off the power, first turn off the power to the external device, then to the instrument. Since this instrument's power may auto-
matically be turned off due to the Auto Power Off function (page 16), turn off the power to the external device, or disable Auto
Power Off when you do not intend to operate the instrument. If the instrument's power is automatically turned off via the Auto
Power Off function, first turn off the external device, then turn on the power to the instrument then the external device again.
• When the AUX OUT jacks are connected to an external device, never connect the [AUX IN] jacks to the output jacks of the
external device. Doing so could result in feedback (oscillation) that may damage both the devices.
Connecting to a Mixer—OUTPUT [L] [R] jacks (Balanced)
In recording and live-performance environments, musical instruments are
commonly connected to a mixer. For these applications, this instrument is
equipped with a pair of professional-use, balanced XLR jacks that prevent
unwanted noise in the output signals. When connecting to a mixer, we recom-
mend using these OUTPUT [L] [R] jacks.
XLR connector
Instrument
NOTICE
• To avoid possible damage to the devices, first turn on the power to the instrument, then to the external device. When turning
off the power, first turn off the power to the external device, then to the instrument. Since this instrument's power may auto-
matically be turned off due to the Auto Power Off function (page 16), turn off the power to the external device, or disable Auto
Power Off when you do not intend to operate the instrument. If the instrument's power is automatically turned off via the Auto
Power Off function, first turn off the external device, then turn on the power to the instrument then the external device again.
• When the OUTPUT jacks are connected to an external device, never connect the [AUX IN] jacks to the output jacks of the
external device. Doing so could result in feedback (oscillation) that may damage both the devices.
42 • N3X
Owner's Manual
Powered speaker
AUX IN
Phone plug
(standard)
Audio cable
Audio signal
OUTPUT R
OUTPUT L
Amplifier
Mixer
Left
speaker speaker
NOTE
Use audio cables and adaptor plugs with no
resistance.
NOTE
Use only the AUX OUT [L/L+R] jack for
connection with a mono device.
NOTE
If you are monitoring the sound output via
the AUX OUT [L/L+R] [R] jacks from head-
phones connected to the instrument, you
should set "Binaural sampling/Stereo-
phonic Optimizer" to "OFF." Refer to page
18 for details.
NOTE
If you are monitoring the sound output via
the OUTPUT [L] [R] jacks from headphones
connected to the instrument, you should
set "Binaural sampling/Stereophonic Opti-
mizer" to "OFF." Refer to page 18 for
details.
Right