Using The Metronome - Yamaha AvantGrand N3X Owner's Manual

Basic Operations and More

Using the Metronome

The metronome feature is convenient for practicing with an accurate tempo.
1
Press [METRONOME] to start the metronome.
While the metronome sounds, a dot at the right side of the LED display and the
lamp of the metronome button flash on and off to the tempo.
120.
2
Press [METRONOME] again to stop the metronome.
Selecting the Beat
While holding down [METRONOME], press one of the C3–F3
keys. The selected value is shown on the display while both
controls are held.
Display Key
0 C3
(no 1st beat accent)
2
C#3
3 D3
Only the first beat is accented with a bell sound when set to a value other than 0.
Adjusting the Metronome volume
While holding down [METRONOME], press one of the C1–G2 keys to set the vol-
ume. The specified value is shown on the display while both controls are held.
22 • N3X
Owner's Manual
The beat lamp
flashes at the current
tempo
C3 F3
Beat Display Key
0
4 D#3
5
2 E3
3 6 F3
min.
Lowest C1 D2
key (A-1) (1) (15) (20)
The volume level increases as you press higher keys.
1, 2
0
Beat
Highest key (C7)
Beat
4
5
6
max.
G2
Default setting: 0 (No 1st beat accent)
NOTE
The Beat of the metronome is restored to
the default setting when the power is turned
off.
Setting range: 1–20
Default setting: 15
NOTE
The metronome volume setting is retained
even when the power is turned off.