Appendix; Message List - Yamaha AvantGrand N3X Owner's Manual

Appendix

Message
CLr Displayed when the initialization (page 40) is completed.
Displayed when Musicsoft Downloader is started on a computer connected to the instrument. When
con
this message appears, you cannot operate the instrument.
Displayed when the character code (page 33) is not appropriate for the file name of the Song which
you are selecting. Switch the character code.
Displayed when the data format is not compatible with this instrument, or the data has some other
E01 problems. This Song cannot be selected.
Displayed when no USB flash drive can be found, or a problem has occurred in the USB flash drive.
Disconnect and connect the device again, then execute the operation. If this message appears
repeatedly even when there aren't any other likely problems, the USB flash drive may be damaged.
E02
Indicates that the USB flash drive is protected.
Displayed when the memory of the USB flash drive becomes full, or the number of files and folders
E03
exceeds the system limit.
Displayed when Audio Song playback or recording has failed. If you are using a USB flash drive to
E04
which data has already been stored or deleted a number of times, first make sure that the device
does not contain important data, then format it (page 37) and connect to the instrument again.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-
EE1
tributor.
A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized dis-
EEE
tributor.
End Displayed when the current operation is completed.
The memory of the instrument or the USB flash drive is running out. We recommend that you remove
EnP
any unnecessary files (page 39) to ensure sufficient memory capacity before start recording.
The operation could not be completed because the instrument's internal memory or the USB flash
FUL drive is nearly full. If this message is shown while recording, your performance data may not be cor-
rectly saved.
n Y Confirms whether each operation is executed or not.
Displayed when you try to overwrite or delete a protected Song or read-only file. Use a read-only file
Pro
after cancelling the read-only setting.
Displayed when an unformatted USB flash drive is connected. First make sure that the device does
UnF
not contain important data, then format it (page 37).
Communication with the USB flash drive has been shut down because of overcurrent to the USB
Uoc flash drive. Disconnect the USB flash drive from the [USB TO DEVICE] terminal, then turn on the
power of the instrument again.
Communication with the USB flash drive has failed. Remove the USB flash drive and make the con-
UU1 nection again. If the message appears even when the USB flash drive is connected properly, the USB
flash drive may be damaged.
This USB flash drive is not supported on this instrument, or too many USB flash drives may have
UU2 been connected. Refer to "About USB Flash Drives" (page 36) for information on the USB flash drive
connection.
* When an operation (such as saving or data transfer) is in process, the display shows a sequence of flashing dashes.
* Press any button to exit from these message displays.
46 • N3X
Owner's Manual

Message List

Descriptions