Connecting Audio Devices (Output [L/L+R]/[R] Jacks, [Aux In] Jack) - Yamaha PSR-S950 Owner's Manual

Connecting Audio Devices (OUTPUT [L/L+R]/[R] jacks, [AUX IN] jack)

Using an External Stereo System for Playback
You can connect a stereo system to amplify the instrument's sound by using the
OUTPUT [L/L+R]/[R] jacks. When using the PSR-S950, the microphone or guitar
sound connected to the instrument's [MIC/LINE IN] jack is output at the same time.
Phone plug
(standard)
When these are connected, you can use the instrument's [MASTER VOLUME] dial
to adjust the volume of the sound output to the external device.
Playing a Portable Audio Player with the Built-in Speakers
You can connect the headphone jack of a portable audio player to the instrument's
[AUX IN] jack, letting you hear the sound of that portable audio player through the
built-in speakers of the instrument.
Stereo mini plug
Powered speaker
Input jack
Phone plug
(standard)
Audio cable
Portable audio
player
Headphone jack
Stereo mini plug
Audio cable
NOTE
Use audio cables and adaptor plugs
having no (zero) resistance.
NOTE
Use only the [L/L+R] jack for connec-
tion with a monaural device.
NOTICE
When the instrument's sound is
output to an external device, first
turn on the power to the instru-
ment, then to the external
device. Reverse this order when
you turn the power off. Other-
wise, damage to the instrument
and external device may occur.
Because this instrument's power
may automatically be turned off
due to the Auto Power Off func-
tion (page 15), turn off the power
to the external device, or disable
the Auto Power Off when you do
not intend to operate the instru-
ment for a while.
NOTICE
Do not route the output from the
[OUTPUT] jacks to the [AUX IN]
jack. If you make this connec-
tion, the signal input at the [AUX
IN] jack is output from the [OUT-
PUT] jacks. These connections
could result in a feedback loop
that will make normal perfor-
mance impossible, and may
even damage the equipment.
NOTICE
When the sound of an external
device is output to the instru-
ment, first turn on the power to
the external device, then to the
instrument. Reverse this order
when you turn the power off.
Otherwise, damage to the instru-
ment and external device may
occur.
NOTE
The instrument's [MASTER VOLUME]
setting affects the input signal from the
[AUX IN] jack.
PSR-S950/S750 Owner's Manual
10
89