How To Clean Your Infant Carrier; Cleaning The Straps And Harness; Harness Buckle - CYBEX CLOUD Q Manual

HOW TO CLEAN YOUR INFANT CARRIER

Use only mild soap and water to clean all webbing, metal and plastic parts of your child's restraint,
using a damp cloth. Do not use chemicals or cleaning agents.
NEVER remove Harness or Harness components from Infant Carrier.
NEVER use bleach, household cleaners or solvents.
DO NOT lubricate.
DO NOT try and place any hardware into a washing machine.

CLEANING THE STRAPS AND HARNESS

You should only spot clean the straps and harness with a damp sponge. The harness straps can be
soaked, however they must be thoroughly dried without excessive heat (never tumble dry).
DO NOT place straps and harness in the washing mashine.

HARNESS BUCKLE

To ensure the buckle remains operational, the inside of the buckle must be kept free of liquids, sand, dirt,
fluff, food or similar substances. If the buckle is not operating or you do not hear a strong audible CLICK
when tongues are inserted then the buckle may need to be replaced. Contact the Cybex distributor at
CNP Brands: 1300 667 137 (Australia), or Wainhouse Distribution: 0800 567 5000 (New Zeland):
29
CARE AND CLEANING (Continued)