Power Cable Usage Guidelines - Hitachi g200 Reference Manual

CEE 7/7
BS-1363
AS-3112

Power cable usage guidelines

Hitachi storage systems are intended for rack installation and ship with power
cords. Installation and service requirements may require additional cords and
cables to be ordered. The type of power cable required by a given installation
is determined primarily by the:
• Type of AC line feed provided by the facility.
• Type of AC source (wall outlet or modular and monitored PDU) to be used.
• Serviceability of components to be connected.
Storage systems require a country-specific power cable for direct connection
to a facility AC feed.
Storage systems are designed to allow replacement of hot-pluggable
components without removing the chassis from the rack. As a result, power
cables can be short because cable movement is of minimal consideration.
Hitachi Virtual Storage Platform G200 Hardware Reference Guide
Description Receptacle (male end)
Data and power cables
Input rating
200V-240V 4 CEE (7) II, IV, VII
3 IEC 83
200V-240V 5 BS 1365
3IEC 83
200V-240V 6 AS C112
Reference standards
107