Configure The Lldp-Med Port Settings - NETGEAR GC110 User Manual

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
The page refreshes and displays the data transmitted in the network policy TLVs for the
interface.
The following table describes the LLDP-MED network policy information that displays on the
page.
Table 19. LLDP-MED network policy information
Field
Network Policy Number
Application
VLAN ID
VLAN Type
User Priority
DSCP

Configure the LLDP-MED Port Settings

You can enable LLDP-MED mode on an interface and configure its properties.
To configure LLDP-MED settings for a port:

1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the password field.
Description
The policy number.
The media application type associated with the policy, which can be one of the
following:
• Unknown
• Voice
• Guest Voice
• Guest Voice Signaling
• Softphone Voice
• Video Conferencing
• Streaming Video
• Video Signaling
A port can receive multiple application types. The application information is
displayed only if a network policy TLV was transmitted from the port.
The VLAN ID associated with the policy.
Indicates whether the VLAN associated with the policy is tagged or untagged.
The priority associated with the policy.
The DSCP associated with a particular policy type.
Configure System Information
70
Access the Switch on page 11.