Change The Management Mode Back To Netgear Insight App - NETGEAR GC110 User Manual

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select the PC-Web-Browser radio button.
6. Click the Apply button.
Your settings are saved. The System Information page closes and the login window
displays again.
Any current Insight-manageable device settings are saved to the cloud server.
7. Enter the switch's password in the Password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays and the full local browser interface is now
available.

Change the Management Mode Back to NETGEAR Insight App

To change the management mode of the switch back to NETGEAR Insight app:

1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password. If you added the switch to a network on the Insight
app before and you did not yet change the password through the local browser interface,
enter your Insight network password.
The System Information page displays.
5. Select the NETGEAR Insight App radio button.
6. Click the Apply button.
Access the Switch
Access the Switch
Getting Started
19
on page 11.
on page 11.