NETGEAR GC110 User Manual page 78

Insight Managed 8-Port Gigabit Ethernet Smart Cloud Switch with 2 SFP Fiber Ports
Field
MAC/PHY Details
Auto-Negotiation Supported Specifies whether the remote device supports port-speed autonegotiation.
Auto-Negotiation Enabled
Auto Negotiation Advertised
Capabilities
Operational MAU Type
MED Details
Capabilities Supported
Current Capabilities
Device Class
PoE Device Type
PoE Power Source
PoE Power Priority
PoE Power Value
Hardware Revision
Firmware Revision
Software Revision
Serial Number
Model Name
Asset ID
Description
The possible values are True or False.
The port speed autonegotiation support status. The possible values are True
and False.
The port speed autonegotiation capabilities.
The Medium Attachment Unit (MAU) type. The MAU performs physical layer
functions, including digital data conversion from the Ethernet interface
collision detection and bit injection into the network.
The supported capabilities that were received in MED TLV from the device.
The advertised capabilities that were received in MED TLV from the device.
The LLDP-MED endpoint device class. The possible device classes are as
follows:
• Endpoint Class 1 Indicates a generic endpoint class, offering basic LLDP
services.
• Endpoint Class 2 Indicates a media endpoint class, offering media
streaming capabilities as well as all Class 1 features.
• Endpoint Class 3 Indicates a communications device class, offering all
Class 1 and Class 2 features plus location, 911, Layer 2 switch support,
and device information management capabilities.
The PoE device type advertised by the remote device.
The PoE power type advertised by the remote device.
The PoE power priority advertised by the remote device.
The PoE power value advertised by the remote device.
The hardware version advertised by the remote device.
The firmware version advertised by the remote device.
The software version advertised by the remote device.
The serial number advertised by the remote device.
The model name advertised by the remote device.
The asset ID advertised by the remote device.
Configure System Information
78